Posts: 42
Joined: Mon Apr 06, 2026
I have a persistent issue with the rear air suspension and would like some advice.
A new nearside airline has been installed from the compressor to the suspension, and both rear air suspension units have been replaced with authentic BMW units.
The height of the suspension was initially accurate. After a week of use, the "Chassis function restricted" warning reappeared, and I noticed that the compressor was running for a longer period of time during start-up and sometimes when stopped at traffic lights, among other things.
Before, the problem was with the near side of the suspension dropping; however, recently, the rear suspension has unexpectedly risen to its maximum height on both sides and has stayed fully inflated—even when parked overnight. It seems like the compressor isn't working anymore.
It's making me think that the valve block, ride-height sensor, compressor, or suspension control module might be malfunctioning.
Does anybody know what to look into first, or has anyone had similar symptoms on a G31? After hearing that a new compressor is necessary, I thought there must be other things I should check first.
I would greatly appreciate any advice or suggestions you could provide.
Many thanks
A new nearside airline has been installed from the compressor to the suspension, and both rear air suspension units have been replaced with authentic BMW units.
The height of the suspension was initially accurate. After a week of use, the "Chassis function restricted" warning reappeared, and I noticed that the compressor was running for a longer period of time during start-up and sometimes when stopped at traffic lights, among other things.
Before, the problem was with the near side of the suspension dropping; however, recently, the rear suspension has unexpectedly risen to its maximum height on both sides and has stayed fully inflated—even when parked overnight. It seems like the compressor isn't working anymore.
It's making me think that the valve block, ride-height sensor, compressor, or suspension control module might be malfunctioning.
Does anybody know what to look into first, or has anyone had similar symptoms on a G31? After hearing that a new compressor is necessary, I thought there must be other things I should check first.
I would greatly appreciate any advice or suggestions you could provide.
Many thanks
Posts: 91
Joined: Mon Apr 06, 2026
A brand new compressor unit was the outcome of a comparable issue I encountered last year.
After disassembling the old unit (which had travelled 60,000 miles), I discovered that it was in pristine shape, with clean filter media and no evidence of contamination. I decided to keep it.
I discovered a small "O" seal wedged beneath the valve spindle while disassembling the soleniod valves; unfortunately, I can't recall which valve it was.
The unit seemed to function flawlessly after I replaced the seal.
The G31 compressor is made in India, not Germany like the old E39, which is the only difference between the two units. Westinghouse is a quality equipment manufacturer in compressed air equipment, so I'm starting to wonder why this might happen. My old E39 had no compressor issues and only had two airbags.
Is there any connection between this and quality? depends on the person.
After disassembling the old unit (which had travelled 60,000 miles), I discovered that it was in pristine shape, with clean filter media and no evidence of contamination. I decided to keep it.
I discovered a small "O" seal wedged beneath the valve spindle while disassembling the soleniod valves; unfortunately, I can't recall which valve it was.
The unit seemed to function flawlessly after I replaced the seal.
The G31 compressor is made in India, not Germany like the old E39, which is the only difference between the two units. Westinghouse is a quality equipment manufacturer in compressed air equipment, so I'm starting to wonder why this might happen. My old E39 had no compressor issues and only had two airbags.
Is there any connection between this and quality? depends on the person.
Posts: 42
Joined: Mon Apr 06, 2026
I appreciate you sharing that data. How annoying that all it took to fix the problem was a basic 'O' ring seal! Although I have my suspicions that my mechanic might not be overly enthusiastic, I can still ask him if he would be open to doing the same and see his response.
Aftermarket options seem to cost between £300 and £600, which is a significant reduction from the £1,100 I paid for the original BMW unit.
However, I'm curious to hear your thoughts on aftermarket compressors because I've heard both good and bad things about them. Would you recommend them, or is a factory-installed BMW the way to go?
Many thanks
Aftermarket options seem to cost between £300 and £600, which is a significant reduction from the £1,100 I paid for the original BMW unit.
However, I'm curious to hear your thoughts on aftermarket compressors because I've heard both good and bad things about them. Would you recommend them, or is a factory-installed BMW the way to go?
Many thanks
Posts: 91
Joined: Mon Apr 06, 2026
Similar dilemma here: aftermarket parts are risky, and hiring a mechanic to take it all apart and look into it is expensive. In the end, I decided to have a BMW specialist install the part, and if anything goes wrong, the warranty should cover it. Who knows? I still have my old unit on hand just in case. How did the o ring become dislodged? Never will we know for sure if the poor quality of the ring was to blame or if the spindle groove was machined to an incorrect size.
A touch cynical regarding whether standards are slightly lowered or manufacturing shortcuts are taken. While working for a number of years in the field of compressed air control systems, I learned that Wabco was a trusted name in high-reliability, robust equipment for use in mission-critical settings.
A touch cynical regarding whether standards are slightly lowered or manufacturing shortcuts are taken. While working for a number of years in the field of compressed air control systems, I learned that Wabco was a trusted name in high-reliability, robust equipment for use in mission-critical settings.
Posts: 91
Joined: Mon Apr 06, 2026
Posts: 42
Joined: Mon Apr 06, 2026
The genuine OEM parts are what I've settled on. The extra money isn't cheap, but I'd rather spend it now so I don't have to worry about having to take the car in for repairs later on. Plus, I intend to keep the car for a long time.
Also, I'm having new tires put on, but this time I'm getting non-run-flat tires. Hopefully, now that the suspension is fixed and I have new tires, the car will drive like new!
Your assistance and encouragement are greatly valued; thank you once more.
Enjoy your ride!
Also, I'm having new tires put on, but this time I'm getting non-run-flat tires. Hopefully, now that the suspension is fixed and I have new tires, the car will drive like new!
Your assistance and encouragement are greatly valued; thank you once more.
Enjoy your ride!